Microwave radiation
EN 60601-1
The power density of unintended microwave radiation at frequencies between 1 GHz and 1 00 GHz shall not exceed 1 0 W/m2 at any point 50 mm away from a surface of the ME
EQUIPMENT under reference test conditions. This requirement does not apply to parts of the apparatus where microwave radiation is propagated intentionally, for example, at waveguide
output ports.
NOTE This requirement is equivalent to that in subclause 1 2.4 of IEC 61 01 0-1 :2001 .
Compliance is checked by review of MANUFACTURER ' S calculations and, if necessary, the following test:
The ME EQUIPMENT is operated at the most unfavourable RATED MAINS VOLTAGE and with any control adjusted so as to give maximum microwave radiation whilst maintaining the
ME EQUIPMENT in NORMAL USE .
Internal pre-set controls not intended to be adjusted during the expected SERVICE LIFE of the ME EQUIPMENT are not considered.
Measurements are made at a distance of 50 mm from any surface to which OPERATORS other than SERVICE PERSONNEL :
– can gain access without the use of a TOOL ;
– are deliberately provided with the means of access; or
– are instructed to enter regardless of whether or not a TOOL is needed to gain access.
Any measurement exceeding 10 W/m 2 under reference test conditions constitutes a failure.
a射线、b射线、y射线微波辐射功率谱测试，非手机SAR测试。
页:
[1]
