加拿大(IC)在2013年1月更新 RSS-132 issue 3和RSS 133 issue 6标准

web · 发表于 2013-10-9 20:30:52

马上注册，结交更多电磁兼容工程师，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

×

加拿大于2013年1月更新RSS-132 issue 3 取代了RSS-132 issue 2,更改的部分有六点如下：
1、The stated requirement that RSS-132 be used in conjunction with RSS-Gen, General Requirements and Information for the Certification of Radio Apparatus, has been moved from the Preface section to Section 3.1.
2、The cordless base provision has been removed.
3、The Electronic Serial Number (ESN) feature has been removed.
4、The mobile equipment identifier (MEID) and international mobile equipment identity (IMEI) to identify mobile equipment have been added.
5、The specification that equipment’s transmit power shall be measured in terms of average power has been added. The transmitter’s peak-to-average power ratio is also specified.
6、The alternative unwanted emission limit for base station equipment with bandwidth greater than4 MHz has been removed. Equipment shall comply with the same limit regardless of its bandwidth.

详阅 (http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf05978.html)

而RSS-133 issue 6 取代了RSS-133 issue 5,所更改六点如下：
1.       The stated requirement that RSS-133 be used in conjunction with RSS-Gen, General Requirements and Information for the Certification of Radio Apparatus, has been moved to Section 3.1.
2.       The alternative out-of-block emission limit in any 30 kHz measurement bandwidth for base station equipment has been removed.
3.       The Electronic Serial Number (ESN) and the International Mobile Subscriber Identity (IMSI) feature has been removed.
4.       The provision for Digital Packet Data (DPD) systems has been removed.
5.       The provision for cordless-mode telephone base stations has been removed.
6.       The specification that equipment’s transmit power shall be measured in terms of average power has been added.

详阅 (http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01520.html)