出口马来西亚的LED灯具安全、性能、相关测试标准

MALAYSIAN STANDARDS ON LIGHT EMITTING DIODES (LEDs)
Over the past few years a new light source named light emitting diodes, or LEDs has been introduced into the exterior lighting market. LEDs or solid-state lighting solutions, were developed in the electronics industry when it was discovered that light is produced when a current is passed through a diode.

The environmental and energy saving concerns are driving the global take-up of energy-efficient bulbs. LEDs promise the benefits of long life, low energy, minimal maintenance and flexible lighting output.  Since then LEDs becoming more and more popular with consumers in this category. LED-based lighting solutions are built on LED chips and modules. Light-emitting diode (LED) technology is rapidly improving and is becoming more common in commercial settings.

LED products need proper standards to ensure the safety, and to measure the performance of LED-related control gear, lamps, modules and luminaires.  Realising the needs for Malaysian Standards on LED, the following MS have been published covering safety and testing, performance and controlgears of LEDs.

MS IEC 60598-1:2012 (P), Luminaires - Part 1: General requirements and tests
MS IEC 60838-2-2:2008, Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
MS IEC 61347-1:2012 (P), Lamp controlgear - Part 1: General and safety requirements
MS IEC 61347-2-13:2012 (P), Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules
MS IEC 62031:2011, LED modules for general lighting - Safety specifications
MS IEC 62384:2012 (P), DC or AC supplied electronic controlgear for LED modules - Performance requirements
MS IEC 62560:2012 (P), Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
MS 62504:2012 (P), General lighting - LEDs and LED modules - Terms and definitions
MS 62612:2012 (P), Self-ballasted LED-lamps for general lighting services - Performance requirements
MS 62717:2012 (P), LED modules for general lighting - Performance requirements
MS 62722-1:2012 (P), Luminaire performance - Part 1: General requirements
MS 62722-2-1(P), Luminaire performance - Part 2-1: Particular requirements for LED luminaires

马来西亚（LED）标准在过去的几年里，新光源命名发光二极管，或者发光二极管已被引入的外部照明市场。发光二极管或固态照明解决方案，在电子工业中被开发，当它被发现，当电流通过二极管的光产生。环境和节能的关注正在推动节能灯泡的全球卷取。 LED的承诺寿命长，低能耗，低维护和灵活的照明输出的好处。从那时起，LED灯越来越受消费者欢迎这一类。基于LED的照明解决方案是建立在LED芯片和模块。发光二极管（LED）技术正在迅速提高，并且正在成为在商业环境中更常见。LED产品需要适当的标准，以确保安全，并测量LED相关控制装置，灯具，模块及灯具的性能。共建LED上为马来西亚标准的需求，下面的马来西亚标准已经发布涉及安全和测试，性能和LED的控制设备。

MS IEC 60598-1：2012（P），灯具 - 第1部分：一般要求与试验
MS IEC 60838-2-2：2008，其他灯座 - 第2-2部分：特殊要求 - 用于LED模块
MS IEC 61347-1：2012（P），灯的控制装置 - 第1部分：一般要求和安全要求
MS IEC 61347-2-13：2012（P），灯的控制装置 - 第2-13部分：直流特殊要求。或交流LED模块用交流电子控制装置
MS IEC 62031：2011，LED模组普通照明 - 安全规范
MS IEC 62384：2012（P），直流或交流供电电子控制装置的LED模块 - 性能要求
MS IEC 62560：2012（P），自镇流LED灯由电压> 50 V普通照明服务 - 安全规范
MS 62504：2012（P），普通照明 -  LED和LED模块 - 术语和定义
MS 62612：2012（P），自镇流LED灯用于普通照明 - 性能要求
MS 62717：2012（P），LED模组普通照明 - 性能要求
MS 62722-1：2012（P），灯具的性能 - 第1部分：通用要求
MS 62722-2-1（P），灯具的性能 - 第2-1部分：LED灯具的特殊要求。

http://www.sirim.my/

马来西亚官方标准在线网站

https://www.msonline.gov.my/display.php?view=75
https://www.msonline.gov.my