Rope lights与Lighting chains的区别是？

2021-8-4 10:13| 发布者: 曾工| 查看: 6584| 评论: 1|原作者: 曾工|来自: 电磁兼容网

摘要: IEC 60598-2-20-2014 20.3.1 lighting chain luminaire comprising an assembly of series-connected lamps, parallel-connected lamps or series/parallel-connected lamps and interconnecting insulated conduct ...

IEC 60598-2-20-2014

20.3.1 lighting chain
luminaire comprising an assembly of series-connected lamps, parallel-connected lamps or series/parallel-connected lamps and interconnecting insulated conductors

Note 1 to entry: For lighting chains with non-standardised lamps (e.g. lamps of the push-in type) the lamps are regarded as part of the chain.
Note 2 to entry: For lighting chains with non-removable lamps, the lamps are regarded as part of the chain.
Note 3 to entry: A lighting chain may incorporate control devices (e.g. flasher units, see 20.7.8).
Note 4 to entry: Unless otherwise stated, references to lamps within this standard also refer to LEDs.

20.3.2 rope light
sealed lighting chain lighting chain with non-replaceable light sources enclosed in a rigid or flexible insulating translucent pipe or tube, sealed at the ends, with or without joints
Note 1 to entry: Covered by IEC 60598-2-21 .

20.3.1 灯链
由串联连接的灯、并联连接的灯或串联/并联灯和互连绝缘导体

注 1：对于带有非标准化灯（例如推入式灯）的灯链，灯为被视为链条的一部分。
注 2：对于带有不可拆卸灯的灯链，灯被视为灯链的一部分。
注 3：照明链可能包含控制装置（例如闪光灯装置，见 20.7.8）。
注 4：除非另有说明，本标准中对灯的引用也指 LED。

20.3.2 绳灯
密封灯链带有不可更换光源的灯链，封装在刚性或柔性绝缘材料中半透明的管子或管子，两端密封，带或不带接头

注1：IEC 60598-2-21中包括此种。